[cisco-voip] Ring an FXS and ephone on parallel

[Mike Taylor]

I think this is what you are after;

https://www.myciscocommunity.com/docs/DOC-1484

Regards,
Mike

On 17/04/2010 6:57 a.m., Lee wrote:
> Erik,
>
> Got an example for that?
>
> On Thu, Apr 15, 2010 at 7:10 PM, Erick B. <erickbee at gmail.com 
> <mailto:erickbee at gmail.com>> wrote:
>
>     CME?
>
>     If so, you can configure the FXS ports for SCCP to same router and
>     make them ephones and put the the DN on the ephones that need it.
>
>     On Thu, Apr 15, 2010 at 5:23 PM, Pavan <pav.ccie at gmail.com
>     <mailto:pav.ccie at gmail.com>> wrote:
>     > Is there a way to ring an FXS and an ephone at the same time?
>     > I can't use voice-hunt parallel as I am on a 2600xm
>     >
>     > Sent from my phone
>     > _______________________________________________
>     > cisco-voip mailing list
>     > cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     > https://puck.nether.net/mailman/listinfo/cisco-voip
>     >
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100417/f9ac912c/attachment.html>