[cisco-voip] MGCP GW logs and autocfg endpoint

[Ryan Ratliff]

From your CUCM publisher's CLI run this command and provide the output:
run sql select pkid,name,tkmodel from device where name = 'AN168DD75E80FFF'

Are you sure this is an MGCP gateway?  The virtual endpoint is typically seen with vg224 sccp devices when the sccp auto-config is enabled.

-Ryan

On Apr 17, 2010, at 9:44 AM, george.hendrix at l-3com.com wrote:

> Hi Everyone,
>  
>   I have an MGCP GW setup and have seen a couple of things that do not make sense.
>  
> The first thing is this error.  However, calls go through with no problem, inbound and outbound and all resources are registered with CCM.
>  
> sym_xapp_process_ccapi_events: minor is ZERO - should be non-zero for CCAPI event
>  
> The second thing I see is this auto configured endpoint.
>  
> AutoCfg_Virtual_Endpoint Oper State: ACTIVE_IN_PROGRESS - Cause Code: NOT_REGIS_WITH_CCM
> Active Call Manager: NONE
> TCP Link Status: NOT_CONNECTED, Device Name: AN168DD75E80FFF
> Reported Max Streams: 0, Reported Max OOS Streams: 0
> Supported Codec: g711ulaw, Maximum Packetization Period: 20
>  
> I am not sure what it is and do see any way to remove it.  All profiles that have been created are registered just fine.
>  
> Thanks,
>  
> Bill Hendrix
> L-3 Communications
> george.hendrix at l-3com.com
>  
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100419/21b506c1/attachment.html>