[cisco-voip] MGCP GW logs and autocfg endpoint

Mon Apr 19 11:40:37 EDT 2010

These aren't VG224s, they are 2800 series routers with dsp profiles
registered to CCM 4.2(3).

Bill Hendrix

george.hendrix at l-3com.com

W: 813-281-3109  C: 813-205-0979

STRATIS Service Desk: 1-800-871-9983 

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Monday, April 19, 2010 11:28 AM
To: Hendrix, George (Bill) @ STRATIS
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] MGCP GW logs and autocfg endpoint

In CCM 4.1(3) that VG224 SCCP auto registration would fill the Event
Viewer log files up making them unuseable...other workaround was to put
a dummy dn/line on every vg224 port so they are registered.

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Monday, April 19, 2010 10:55 AM
To: george.hendrix at l-3com.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MGCP GW logs and autocfg endpoint

Pretty sure CM 4.2 doesn't support the sccp auto-config virtual ports.
At least make sure they are on the last CM 4.2(3)ES.  You can disable it
by removing the command "ccm-manager sccp".

-Ryan

On Apr 19, 2010, at 10:19 AM, george.hendrix at l-3com.com wrote:

Hi Ryan,

  Yes, I have actually seen this on two different 2800 series routers.
One has a SIP trunk to the PSTN (no MGCP on this one) and the other has
T1's configured under MGCP in CCM.  Also, I am running CCM 4.2.  I was
not able to run the command below.  Here is some output from the second
router (w/ SIP trunk and no MGCP).  The 3 profiles I have created on
both routers are all registered.  Both routers are configured in
failover mode in the event connection to CCM is lost.

AutoCfg_Virtual_Endpoint Oper State: ACTIVE_IN_PROGRESS - Cause Code:
TCP_CONN_ERROR

Active Call Manager: NONE

TCP Link Status: NOT_CONNECTED, Device Name: AN2497C55638FFF

Security

 Signaling Security: AUTHENTICATED TLS

Reported Max Streams: 0, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 20

Bill Hendrix

<image001.jpg>

george.hendrix at l-3com.com

W: 813-281-3109  C: 813-205-0979

STRATIS Service Desk: 1-800-871-9983

From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Monday, April 19, 2010 9:29 AM
To: Hendrix, George (Bill) @ STRATIS
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MGCP GW logs and autocfg endpoint

>From your CUCM publisher's CLI run this command and provide the output:

run sql select pkid,name,tkmodel from device where name =
'AN168DD75E80FFF'

Are you sure this is an MGCP gateway?  The virtual endpoint is typically
seen with vg224 sccp devices when the sccp auto-config is enabled.

-Ryan

On Apr 17, 2010, at 9:44 AM, george.hendrix at l-3com.com wrote:

Hi Everyone,

  I have an MGCP GW setup and have seen a couple of things that do not
make sense.

The first thing is this error.  However, calls go through with no
problem, inbound and outbound and all resources are registered with CCM.

sym_xapp_process_ccapi_events: minor is ZERO - should be non-zero for
CCAPI event

The second thing I see is this auto configured endpoint.

AutoCfg_Virtual_Endpoint Oper State: ACTIVE_IN_PROGRESS - Cause Code:
NOT_REGIS_WITH_CCM

Active Call Manager: NONE

TCP Link Status: NOT_CONNECTED, Device Name: AN168DD75E80FFF

Reported Max Streams: 0, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 20

I am not sure what it is and do see any way to remove it.  All profiles
that have been created are registered just fine.

Thanks,

Bill Hendrix

L-3 Communications

george.hendrix at l-3com.com

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100419/1bf1fcb2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5644 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100419/1bf1fcb2/attachment.jpe>