[cisco-voip] MGCP GW logs and autocfg endpoint

[Ryan Ratliff]

DSPFarm profiles don't result in an auto-config virtual endpoint, only the stcapp process for registering sccp analog endpoints does.

Can you post your config (or unicast it to me)?

-Ryan

On Apr 19, 2010, at 11:40 AM, george.hendrix at l-3com.com wrote:

> These aren’t VG224s, they are 2800 series routers with dsp profiles registered to CCM 4.2(3).
>  
> Bill Hendrix
> <image001.jpg>
> george.hendrix at l-3com.com
> W: 813-281-3109  C: 813-205-0979
> STRATIS Service Desk: 1-800-871-9983
>  
> From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
> Sent: Monday, April 19, 2010 11:28 AM
> To: Hendrix, George (Bill) @ STRATIS
> Cc: cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] MGCP GW logs and autocfg endpoint
>  
> In CCM 4.1(3) that VG224 SCCP auto registration would fill the Event Viewer log files up making them unuseable…other workaround was to put a dummy dn/line on every vg224 port so they are registered.
>  
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
> Sent: Monday, April 19, 2010 10:55 AM
> To: george.hendrix at l-3com.com
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] MGCP GW logs and autocfg endpoint
>  
> Pretty sure CM 4.2 doesn't support the sccp auto-config virtual ports.   At least make sure they are on the last CM 4.2(3)ES.  You can disable it by removing the command "ccm-manager sccp".
>  
> -Ryan
>  
> On Apr 19, 2010, at 10:19 AM, george.hendrix at l-3com.com wrote:
>  
> 
> Hi Ryan,
>  
>   Yes, I have actually seen this on two different 2800 series routers.  One has a SIP trunk to the PSTN (no MGCP on this one) and the other has T1’s configured under MGCP in CCM.  Also, I am running CCM 4.2.  I was not able to run the command below.  Here is some output from the second router (w/ SIP trunk and no MGCP).  The 3 profiles I have created on both routers are all registered.  Both routers are configured in failover mode in the event connection to CCM is lost.
>  
> AutoCfg_Virtual_Endpoint Oper State: ACTIVE_IN_PROGRESS - Cause Code: TCP_CONN_ERROR
> Active Call Manager: NONE
> TCP Link Status: NOT_CONNECTED, Device Name: AN2497C55638FFF
> Security
>  Signaling Security: AUTHENTICATED TLS
> Reported Max Streams: 0, Reported Max OOS Streams: 0
> Supported Codec: g711ulaw, Maximum Packetization Period: 20
>  
>  
>  
> Bill Hendrix
> <image001.jpg>
> george.hendrix at l-3com.com
> W: 813-281-3109  C: 813-205-0979
> STRATIS Service Desk: 1-800-871-9983
>  
> From: Ryan Ratliff [mailto:rratliff at cisco.com] 
> Sent: Monday, April 19, 2010 9:29 AM
> To: Hendrix, George (Bill) @ STRATIS
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] MGCP GW logs and autocfg endpoint
>  
> From your CUCM publisher's CLI run this command and provide the output:
> run sql select pkid,name,tkmodel from device where name = 'AN168DD75E80FFF'
>  
> Are you sure this is an MGCP gateway?  The virtual endpoint is typically seen with vg224 sccp devices when the sccp auto-config is enabled.
>  
> -Ryan
>  
> On Apr 17, 2010, at 9:44 AM, george.hendrix at l-3com.com wrote:
> 
> 
> 
> Hi Everyone,
>  
>   I have an MGCP GW setup and have seen a couple of things that do not make sense.
>  
> The first thing is this error.  However, calls go through with no problem, inbound and outbound and all resources are registered with CCM.
>  
> sym_xapp_process_ccapi_events: minor is ZERO - should be non-zero for CCAPI event
>  
> The second thing I see is this auto configured endpoint.
>  
> AutoCfg_Virtual_Endpoint Oper State: ACTIVE_IN_PROGRESS - Cause Code: NOT_REGIS_WITH_CCM
> Active Call Manager: NONE
> TCP Link Status: NOT_CONNECTED, Device Name: AN168DD75E80FFF
> Reported Max Streams: 0, Reported Max OOS Streams: 0
> Supported Codec: g711ulaw, Maximum Packetization Period: 20
>  
> I am not sure what it is and do see any way to remove it.  All profiles that have been created are registered just fine.
>  
> Thanks,
>  
> Bill Hendrix
> L-3 Communications
> george.hendrix at l-3com.com
>  
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>  
> Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100419/25d5b3be/attachment.html>