[cisco-voip] Line Code Violation T1

[ccieid1ot]

Call the carrier.

On Wed, Apr 21, 2010 at 12:25 PM, Saboor Khan <saboor.khan at gmail.com> wrote:
> Can any one tell me what impacting our circuit down at particular time of
> the day, and line code violation increased, if you look in to our Show
> controller command, this gateway is h323 and have UCC call center,
>
>
> T1 0/0/0 is down.
>   Applique type is Channelized T1
>   Cablelength is short 133
>   Transmitter is sending remote alarm.
>   Receiver has loss of signal.
>   alarm-trigger is not set
>   Soaking time: 3, Clearance time: 10
>   AIS State:Clear  LOS State:Clear  LOF State:Clear
>   Version info Firmware: 20071009, FPGA: 20, spm_count = 0
>   Framing is ESF, Line Code is B8ZS, Clock Source is Line.
>   CRC Threshold is 320. Reported from firmware  is 320.
>   Data in current interval (8 seconds elapsed):
>      6006 Line Code Violations, 0 Path Code Violations
>      0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
>      0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 8 Unavail Secs
>   Total Data (last 2 15 minute intervals):
>      1480482 Line Code Violations, 0 Path Code Violations,
>      0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
>      0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 1800 Unavail
> Secs
>
>
> Thanks in advanced
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>