[cisco-voip] Line Code Violation T1

[Saboor Khan]

Can any one tell me what impacting our circuit down at particular time of
the day, and line code violation increased, if you look in to our Show
controller command, this gateway is h323 and have UCC call center,


T1 0/0/0 is down.
  Applique type is Channelized T1
  Cablelength is short 133
  Transmitter is sending remote alarm.
  Receiver has loss of signal.
  alarm-trigger is not set
  Soaking time: 3, Clearance time: 10
  AIS State:Clear  LOS State:Clear  LOF State:Clear
  Version info Firmware: 20071009, FPGA: 20, spm_count = 0
  Framing is ESF, Line Code is B8ZS, Clock Source is Line.
  CRC Threshold is 320. Reported from firmware  is 320.
  Data in current interval (8 seconds elapsed):
     6006 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 8 Unavail Secs
  Total Data (last 2 15 minute intervals):
     1480482 Line Code Violations, 0 Path Code Violations,
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 1800 Unavail
Secs


Thanks in advanced
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100421/196d44c8/attachment.html>