[cisco-voip] Connecting a CME to Analog Lines

[Kim, Hyoun S]

I have a small office here that utilizes regular analog lines.  There is no current analog PBX in place and the installation of the CME is for future expansion & the eventual move to a PRI.  As it stands right now, this office is buying regular lines and has a physical phone connected to each line (just as a normal house phone).

I know that in other configurations, there are hunt groups & what not, but I'm wondering what kind of interface card I need on the router.  I have a handful of 4-port FXS & FXO cards available to put in this router.

Thanks in advance.
[cid:image001.jpg at 01CAE165.3AAB6CE0]
________________________________
Hyoun Kim * Network Administrator - East Division
640 Broadmor Blvd * Suite 80 * Murfreesboro, TN 37129
' 615.217.6245 * 7 615.217.6247 * * Hyoun.Kim at chartercom.com<mailto:Hyoun.Kim at chartercom.com>


E-MAIL CONFIDENTIALITY NOTICE: 

 

 

 

The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100421/17bc98f2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1990 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100421/17bc98f2/attachment.jpg>