[cisco-voip] shutdown required to install vic3-fxs-e/did card into 3945?

[Bill]

The 3600 routers supported OIR. 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Thursday, April 22, 2010 6:00 PM
To: 'lelio at uoguelph.ca'; 'cisco-voip at puck.nether.net'
Subject: Re: [cisco-voip] shutdown required to install vic3-fxs-e/did card
into 3945?

 

I would shut it down I've never heard any cisco cards to be hot swappable

 

  _____  

From: cisco-voip-bounces at puck.nether.net
<cisco-voip-bounces at puck.nether.net>
To: cisco-voip voyp list <cisco-voip at puck.nether.net>
Sent: Thu Apr 22 18:57:22 2010
Subject: [cisco-voip] shutdown required to install vic3-fxs-e/did card into
3945?


I've tried searching CCO but can't find anything that says I can or can't
install a vic3 module live on the router while it's up. 

Shutting down a router with a CUE engine in it is a drag.

Comments?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100423/21620e6b/attachment.html>