[cisco-voip] shutdown required to install vic3-fxs-e/did card into 3945?

[Lelio Fulgenzi]

The 3900s support OIR, but you have to issue a few commands first and after. But it looks like it's only for the SM slots. 

Oh well, looks like it's shutdown time for me. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Matthew Loraditch" <MLoraditch at heliontechnologies.com> 
To: "lelio at uoguelph.ca" <lelio at uoguelph.ca>, "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net> 
Sent: Thursday, April 22, 2010 6:59:39 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] shutdown required to install vic3-fxs-e/did card into 3945? 


I would shut it down I've never heard any cisco cards to be hot swappable 


>From : cisco-voip-bounces at puck.nether.net <cisco-voip-bounces at puck.nether.net> 
To : cisco-voip voyp list <cisco-voip at puck.nether.net> 
Sent : Thu Apr 22 18:57:22 2010 
Subject : [cisco-voip] shutdown required to install vic3-fxs-e/did card into 3945? 



I've tried searching CCO but can't find anything that says I can or can't install a vic3 module live on the router while it's up. 

Shutting down a router with a CUE engine in it is a drag. 

Comments? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100422/34c76d2f/attachment.html>