[cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card

Lelio Fulgenzi lelio at uoguelph.ca
Fri Apr 23 11:29:54 EDT 2010


hmmm, i'm going to be using a loopback address. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Bill" <bill at hitechconnection.net> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Friday, April 23, 2010 11:20:45 AM GMT -05:00 US/Canada Eastern 
Subject: RE: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card 




The MAC address you configure for SCCP traffic to bind to. 



sccp local gigabitEthernet 0/0 










From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Friday, April 23, 2010 10:15 AM 
To: cisco-voip voyp list 
Subject: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card 




OK, silly question, what MAC address do I use when configuring a VIC3-2FXS-E/DID with SCCP? 

Is it similar to a VG248 where I use the MAC address of fas0/0? 

So on a 3900, I would use the MAC address of GigabitEthernet0/0 ? 

I'll try that and see how it goes. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100423/d9952f24/attachment.html>


More information about the cisco-voip mailing list