[cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card

[Bill]

I don't think you can use a loopback for this. If I remember right this is
the same as setting up a transcoder / conference bridge resource and you
have to use a physical adaptor. 

 

  _____  

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Friday, April 23, 2010 10:30 AM
To: Bill
Cc: cisco-voip voyp list
Subject: Re: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID
card

 

hmmm, i'm going to be using a loopback address.



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)


----- Original Message -----
From: "Bill" <bill at hitechconnection.net>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "cisco-voip voyp list"
<cisco-voip at puck.nether.net>
Sent: Friday, April 23, 2010 11:20:45 AM GMT -05:00 US/Canada Eastern
Subject: RE: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID
card

The MAC address you configure for SCCP traffic to bind to.

 

sccp local gigabitEthernet 0/0

 

 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, April 23, 2010 10:15 AM
To: cisco-voip voyp list
Subject: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID card

 

OK, silly question, what MAC address do I use when configuring a
VIC3-2FXS-E/DID with SCCP?

Is it similar to a VG248 where I use the MAC address of fas0/0?

So on a 3900, I would use the MAC address of GigabitEthernet0/0 ?

I'll try that and see how it goes.


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100423/1a026a70/attachment.html>