[cisco-voip] CUCM 8 and VMWare

Tue Apr 27 17:02:38 EDT 2010

The requirements for vmware are pretty high for running CUCM8 as well.  I think it requires 6GB of RAM and 2 vCPUs.  Not that bad, but if you needed to run 2-3 servers, that could add up quickly for a smaller vmware shop.  I thought I read that it was only supported on the new UCS server platform by cisco.  Is this true, or can you use a third-party built cluster?

On Apr 27, 2010, at 4:43 PM, Matthew Loraditch wrote:

> For testing purposes yes. Works fine for as much as I have looked at .
>  
>  
> Matthew Loraditch, CCNA, CCDA
> 1965 Greenspring Drive
> Timonium, MD 21093 
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
> 
> Visit us at www.heliontechnologies.com 
> Support Issue? Email support at heliontechnologies.com for fast assistance!
>  
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Webber, Bill
> Sent: Tuesday, April 27, 2010 4:04 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CUCM 8 and VMWare
>  
> Is anyone running CUCM 8 on VMWare?
>  
>  
> <image001.jpg> Bill Webber
> 2900 Community College Avenue
> MSS-500
> Cleveland, OH 44115
> 216-987-4372
> 
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100427/88ce510e/attachment.html>