[cisco-voip] Caller ID Override

[Bill Riley]

As Jim said you can't send out CLID info on FXO ports. You don't have
control only TELCO

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Rudholm
Sent: Tuesday, April 27, 2010 6:43 PM
To: Jim Reed
Cc: cisco-voip voyp list
Subject: Re: [cisco-voip] Caller ID Override

You can't override CID on calls sent out an analog phone line.

You might be able to get your telco to present the billing number
as the CID for all your lines but you can't set it yourself the
way you can with a PRI.

-Mark

Jim Reed wrote:
> Anyone have any suggestions for overriding caller ID number on analog
lines
> connected to fxo ports?  I've tried putting the number in every place I
can
> find calling party transform mask but to no avail.  Any suggestions
> gratefully appreciated.  Right now it's sending the number of the
individual
> lines in the hunt group -- depending on which one is available when you
make
> the outbound call.
> Thank You...

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip