[cisco-voip] Configure incoming CLID on isdn of a 2821

[Matthew Loraditch]

Well you aren't getting calling name and the number you are getting appears to be private, is this a telco pri or a private link?  albeit regardless you should be getting the number to come through to the phones unless you have something in CCM or your dial-peers altering it.


Matthew Loraditch, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Leetun, Rob
Sent: Wednesday, April 28, 2010 2:33 PM
To: Leetun, Rob; cisco-voip at puck.nether.net
Cc: Barger, Joe
Subject: Re: [cisco-voip] Configure incoming CLID on isdn of a 2821

Here is the Debug isdn q931

Apr 28 12:14:43.243: ISDN Se0/2/0:23 Q931: RX <- SETUP pd = 8  callref = 0x001B
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98397
                Exclusive, Channel 23
        Facility i = 0x9FAA068001008201008B0100A11802011C0201008210416E64726561204672616E636973636F
                Protocol Profile =  Networking Extensions
                0x0100
                0x820100
                0x8B0100
                0xA11802011C0201008210416E64726561204672616E636973636F
                Component = Invoke component
        Calling Party Number i = 0x00A0, '4718'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0x80, '3579'
                Plan:Unknown, Type:Unknown
Apr 28 12:14:43.259: ISDN Se0/2/0:23 Q931: TX -> CALL_PROC pd = 8  callref = 0x801B
        Channel ID i = 0xA98397
                Exclusive, Channel 23
Apr 28 12:14:43.395: ISDN Se0/2/0:23 Q931: TX -> ALERTING pd = 8  callref = 0x801B
        Progress Ind i = 0x8188 - In-band info or appropriate now available
Apr 28 12:14:47.907: %ISDN-6-CONNECT: Interface Serial0/2/0:22 is now connected to 4718 N/A
Apr 28 12:14:47.907: %ISDN-6-CONNECT: Interface Serial0/2/0:22 is now connected to 4718 N/A
Apr 28 12:14:47.907: ISDN Se0/2/0:23 Q931: TX -> CONNECT pd = 8  callref = 0x801B
Apr 28 12:14:47.923: ISDN Se0/2/0:23 Q931: RX <- CONNECT_ACK pd = 8  callref = 0x001B
Apr 28 12:14:56.051: ISDN Se0/2/0:23 Q931: RX <- DISCONNECT pd = 8  callref = 0x001B
        Cause i = 0x8090 - Normal call clearing
Apr 28 12:14:56.051: %ISDN-6-DISCONNECT: Interface Serial0/2/0:22  disconnected from 4718 , call lasted 8 seconds
Apr 28 12:14:56.055: ISDN Se0/2/0:23 Q931: TX -> RELEASE pd = 8  callref = 0x801B
Apr 28 12:14:56.067: ISDN Se0/2/0:23 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x001B


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Leetun, Rob
Sent: Wednesday, April 28, 2010 11:41 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Configure incoming CLID on isdn of a 2821

Hi,

I cannot get incoming CLID to be presented on the phone.  We have a 2821 with isdn.  Does anyone know of a command I can use to get this to work?

Thanks!


Rob

Robert Leetun
Network Engineer
Boulder County Information Technology
2025 14th Street
Boulder, CO 80302
303 441-3866 (W)
303 441-3983 (F)
rleetun at bouldercounty.org<mailto:arees at bouldercounty.org>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100428/9536f527/attachment.html>