[cisco-voip] "shared line" alarm after configured BAT

Mon Aug 2 00:44:57 EDT 2010

Hi Arnold,

It means that its now a shared line (meaning if you rang that number more than one device would ring (Depending), I would run a dial plan report and find out what the line is being shared across.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Arnold Lesar
Sent: Monday, August 02, 2010 3:07 PM
To: VoIPgroup
Cc: arnoldlesar at yahoo.co.uk
Subject: [cisco-voip] "shared line" alarm after configured BAT

Dear All,

after i configured default forwarding number in BAT in ALL directory number configuration

came up alarm "SHARED LINE" in all directory number configuration, actually there is no share line in any directory number.

how to remove this alarm?

http://s881.photobucket.com/albums/ac16/chipetz/?action=view&current=SharedLineAlarm.jpg

Regards,

Arnold Samuel Lesar

------------------------------------------------------
Note: This message was created by ARNOLD SAMUEL LESAR.
------------------------------------------------------

--------------------------------------------------------------------------
--------------------------------------------------------------------------
PT. PELITA RELIANCE INTERNATIONAL
Eka Hospital BSD City, Tangerang 
Address : CBD Lot IX, BSD City, Tangerang 
Phone : (+62-21) 256 555 55 
Fax : (+62-21) 256 555 44 
--------------------------------------------------------------------------
--------------------------------------------------------------------------

*****************************************************************************
This email and all contents are subject to the following disclaimer:

http://www.datacraft-asia.com/disclaimer
*****************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100802/ed253758/attachment.html>