[cisco-voip] Max entries in translation Rule/Profile

[Dew Swen]

Creating another voice translation rule and profile; and applying it to
trunkgroup / voice-port / dial-peer could be the option?

-
Dew Swen


On Wed, Aug 4, 2010 at 9:54 AM, Jawad A Hai <ahjawad at hotmail.com> wrote:

>    Maximum Entries in translation Rule
> Hello All,
>  I had run into a problem, configuring DID to incoming numbers, they are
> couple of hundred extension to be mapped to DID.
> I have this scenario where I need to map couple of hundred internal
> extension to DID numbers, like below. This is in CME going to Voice gateway
> to E1r2.
>
>
> translation-rule 1
>
> Rule 0  3100 5023
>
> Rule 1  3101 5099
>
> Rule 2  3102 5891
>
>
>
> But the limitation here is 16 per Rule, Even if I create voice translation
> rule and assign it to profile, it takes only one translation rule number. So
> limitation of 16 is still there
>
>
>
> I have several dial peers for Local, National, International toll free
>
> One option is to create profiles and create multiple dial peers and assign
> to them, not sure if it works. like
>
> Transaltion proflie 1.. 16 translations .... dp 1(local)..  assign
>
> Translation Profile 1...16 translations..... dp 2 (local).. assign
>
>  and so on..
>
> Else as people suggesting you num-exp..
>
>  What do you think is the best way to solve this.
>
>
>
> I had seen in forums of being able to configure 128 rules, not sure how
> ....
>
>
>
> Regards
>
> Asim
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100804/673454ad/attachment.html>