[cisco-voip] Max entries in translation Rule/Profile

[Jawad A Hai]

Maximum Entries in translation Rule
Hello All, 
 I had run into a problem, configuring DID to incoming numbers, they are couple of hundred extension to be mapped to DID.
I have this scenario where I need to map couple of hundred internal extension to DID numbers, like below. This is in CME going to Voice gateway to E1r2.

translation-rule 1

Rule 0  3100 5023

Rule 1  3101 5099

Rule 2  3102 5891



But the limitation here is 16 per Rule, Even if I create voice translation rule and assign it to profile, it takes only one translation rule number. So limitation of 16 is still there



I have several dial peers for Local, National, International toll free

One option is to create profiles and create multiple dial peers and assign to them, not sure if it works. like

Transaltion proflie 1.. 16 translations .... dp 1(local)..  assign

Translation Profile 1...16 translations..... dp 2 (local).. assign

 and so on..

Else as people suggesting you num-exp..

 What do you think is the best way to solve this.



I had seen in forums of being able to configure 128 rules, not sure how ....



Regards

Asim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100804/82247f8d/attachment.html>