[cisco-voip] Dial-peer configuration

[Bill]

I have a situation where I have hundreds of 1-800 numbers arriving at
various PRI's. I have the ability from the telco to move the 800 numbers
around and provide an ordered list of what PRI's the numbers should roll to
if there is a problem with the first one. I need to configure all of the
H.323 gateways to accept any of the inbound 800 numbers and forward them to
call manager. The telco is only sending 4 digits. Some of the inbound
numbers match my PSTN access code which is 9 and 7. Will configuring the
dial-peers this way cause a problem with overlapping digits? I don't want
the inbound 4 digit numbers to match the POTS dial peers and then fail the
call.

 

 

dial-peer voice 100 pots

 destination-pattern 9[2-9]......

 port 0/2/1:23

 

 

 

dial-peer voice 101 pots

 destination-pattern 91[2-9]..[2-9]......

 port 0/2/1:23

 

 

dial-peer voice 200 voip

 destination-pattern ....

 session target ipv4:1.1.1.1

 dtmf-relay h245-alphanumeric

 codec g711ulaw

 no vad

!

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100805/8f86e993/attachment.html>