[cisco-voip] Integration into Fire System

[Mike King]

One more thing to add to Wes's comments.

Check with the fire alarm company to see if they can provide a contact
closure when alerting.  This might make it easier to create a "start
event"

On Thu, Aug 5, 2010 at 8:54 AM, Wilusz, Mike
<mikewilusz at pricechopper.com> wrote:
> Hi,
> I have an interesting request that came in and I would have to guess it's
> possible, just not sure how the integration would work.  We have a multicast
> paging system installed that when we dial  a pre-defined extension, it will
> page all IP phones within our corporate facility.  We'd like to take an
> audio feed from our fire alarm system and integrate it so it will also alert
> via the IP phones.  We would receive a standard 2-wire feed from the fire
> system, and when audio is sent over the connection, we'd like to have a
> device detect that audio and dial the paging extension to send the audio.
>  Anyone heard of doing something like this before?
> Mike Wilusz, CCNA
> Telecommunications & Networking Supervisor
> Price Chopper Supermarkets / The Golub Corporation
>
> E-Mail: MikeWilusz at PriceChopper.com
> Jabber/XMPP ID: MikeWilusz at golub.com
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>