[cisco-voip] CUCM/HiPath QSIG Integration - Callback CCNR/CCBS not working -

[rschuknecht at gmx.de]

I should also mention that the numbers with the "wrong" Type and Plan  
are within a Facility IE of the Callback Request.

/Robert

--
Von meinem iPhone gesendet



Am 06.08.2010 um 22:24 schrieb "Robert Schuknecht" <rschuknecht at gmx.de>:

> I forgot to mention, we are a using MGCP as gateway Protocol. I  
> already tried to set the number type/plan with Translation-Patterns  
> and Called/Calling Transformation Patterns, inside Callmanager. Also  
> I tried the different Service Parameter Settings for Callback. But  
> nothing worked at all.
>
>
>
> I cant use SIP for the gateway, because AFAIK SIP does not support  
> Callback.
>
>
>
> /Robert
>
>
>
> Von: Bob Zanett (US) [mailto:bob.zanett at us.didata.com]
> Gesendet: Freitag, 6. August 2010 16:51
> An: Robert Schuknecht; 'voip puck'
> Betreff: RE: [cisco-voip] CUCM/HiPath QSIG Integration - Callback  
> CCNR/CCBS not working -
>
>
>
> One way, if your gateway is H323/SIP, you can use translation  
> profiles to modify every call outbound on the QSIG trunk(s).
>
>
>
> Bob
>
>
>
> www.dimensiondata.com
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
> bounces at puck.nether.net] On Behalf Of Robert Schuknecht
> Sent: Friday, August 06, 2010 9:05 AM
> To: 'voip puck'
> Subject: [cisco-voip] CUCM/HiPath QSIG Integration - Callback CCNR/ 
> CCBS not working -
>
>
>
> Hi List,
>
>
>
> i have the following Problem: Callmanager is connected to a Siemens  
> HiPath via an E1 QSIG Connection. For this connection we have to use  
> Number Plan ISDN and Number Type International for the calling  
> number and the called number. Basic Calls are working fine.
>
>
>
> Callback (CCNR/CCBS) is  working only in one Direction, HiPath to  
> CUCM. From CUCM to HiPath Callback is not working, as far as we use  
> ISDN/International for calling/called number. If we change to  
> unknown/unknown for calling/called number, Callback is working from  
> CUCM to HiPath. The HiPath engineer assumes that the NumberPlan/ 
> NumberType ISDN/International is causing the issue. Because, we  
> found out that the calling/called number inside the Callback request  
> are still unknown/unknown though the calling/called numbers from the  
> original call are ISDN/International.
>
>
>
> Does anybody know if it is possible to change the NumberType/ 
> NumberPlan, inside the callback Request to ISDN/International? Or,  
> does anybody know how to configure the HiPath System to accept  
> unknown/unknown even if the original called/calling numbers are in  
> ISDN/International Format?
>
>
>
> The Callmanager we are using is 7.1.3.32900-4, 7.1.3SU2b I think.  
> The version of the HiPath, I do not know.
>
>
>
> Many thanks in advance,
>
>
>
> /Robert
>
>
>
> Disclaimer: This e-mail communication and any attachments may  
> contain confidential and privileged information and is for use by  
> the designated addressee(s) named above only. If you are not the  
> intended addressee, you are hereby notified that you have received  
> this communication in error and that any use or reproduction of this  
> email or its contents is strictly prohibited and may be unlawful. If  
> you have received this communication in error, please notify us  
> immediately by replying to this message and deleting it from your  
> computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100807/fd5057da/attachment.html>