[cisco-voip] what should i see when i have LDAP/AD synch in CUCMv7.1(5b)?

Lelio Fulgenzi lelio at uoguelph.ca
Wed Aug 11 11:50:06 EDT 2010


No, it doesn't provide feed back, but the "perform full sync" button changes to "cancel sync" until the sync is complete. 

That's what I have used in the past to see how long the sync is taking. I usually have to go back to the find results and go back into the directory config to see if the button is back to "perform full sync" 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Chris Ward (chrward)" <chrward at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "voyp list" <cisco-voip at puck.nether.net> 
Sent: Wednesday, August 11, 2010 11:46:01 AM 
Subject: RE: [cisco-voip] what should i see when i have LDAP/AD synch in CUCMv7.1(5b)? 




Oh, pushing the Sync button the directory page doesn’t provide any feedback as I recall. There is no need to sit and wait on that page as it won’t actually return (or at least that is my experience). I would just go see if you have users after a few minutes. 




+Chris 





From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Wednesday, August 11, 2010 11:43 AM 
To: Chris Ward (chrward) 
Cc: voyp list 
Subject: Re: [cisco-voip] what should i see when i have LDAP/AD synch in CUCMv7.1(5b)? 




yeah, i'll test without SSL to see if it works. i remember having issues with SSL before. 

however, i did restart dirsync and the sync seems to be taking a bit longer. 

this will have to wait until tomorrow though....afternoon meeting. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 





From: "Chris Ward (chrward)" <chrward at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "voyp list" <cisco-voip at puck.nether.net> 
Sent: Wednesday, August 11, 2010 11:41:47 AM 
Subject: RE: [cisco-voip] what should i see when i have LDAP/AD synch in CUCMv7.1(5b)? 




You mentioned certs. You are using LDAP over SSL? I suggest grabbing the DirSync logs off the pub and see if there is anything glaring. 



Any chance to test without SSL on port 389/3268? 




+Chris 





From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Wednesday, August 11, 2010 11:34 AM 
To: Chris Ward (chrward) 
Cc: voyp list 
Subject: Re: [cisco-voip] what should i see when i have LDAP/AD synch in CUCMv7.1(5b)? 




Thanks for all the suggestions... 

DirSync activated on publisher - check (does it need to be activated on all subs?) 
AD certificate upload and tomcat restarted - check 
perform full sync clicked - check and check 

The only thing is, the sync seems to complete a bit to quickly considering how long it takes to complete on Unity Connection. It should take at least a few minutes more than five I would guess. 

I've copied all the parameters from Connection over to CUCM, so it should work. 

I'm getting RTMT installed now and will have to download some trace files. If not, TAC time. 

Lelio 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Chris Ward (chrward)" <chrward at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "voyp list" <cisco-voip at puck.nether.net> 
Sent: Wednesday, August 11, 2010 11:30:20 AM 
Subject: RE: [cisco-voip] what should i see when i have LDAP/AD synch in CUCMv7.1(5b)? 



Did you hit the “Perform Full Sync” button on the LDAP Directory page when you were done configuring? Also, I often forget to activate the DirSync service on the system. 




+Chris 





From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Wednesday, August 11, 2010 11:10 AM 
To: voyp list 
Subject: [cisco-voip] what should i see when i have LDAP/AD synch in CUCMv7.1(5b)? 




OK. I configured all the LDAP sync stuff. No errors. 

When I go to users I see nothing. 

In Connection I have to import them. Is there something similar in CUCM? Is the fact that I see no users in the user listing mean something is still not working? 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100811/da17d007/attachment.html>


More information about the cisco-voip mailing list