[cisco-voip] as5400 IOS enhanced conference bridge configuration

[redsnapper]

 Hi,

 I have an AS5400XM gateway with two FC cards in slot 1 (6xPVDM2-64), slot 3 
(2xPVDM2-64), and a 8E1 card in slot 7.
 I want to configure a hardware conference bridge on the gateway, but i
 cannot set a maximum sessions value to it, it shows 0 only:

 GW10(config-dspfarm-profile)#maximum sessions ?
         <0-0>  Number of sessions assigned to this profile


 If i configure a transcoder, it lets me configure more than 300 hardware
 sessions, but whenever i try conference, it gives me none.
 The configuration is as belows. What do you thing is missing?

 voice-card 1
 dsp services dspfarm
 voice-card 3
 dsp services dspfarm

 sccp local Loopback0
 sccp ccm 10.10.10.102 identifier 102 version 7.0
 sccp ccm 10.10.10.101 identifier 101 version 7.0
 !
 sccp ccm group 100
 bind interface Loopback0
 associate ccm 101 priority 1
 associate ccm 102 priority 2
 associate profile 111 register GBIPT_CFB
 !
 dspfarm profile 111 conference
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec g729r8
 codec g729br8
 associate application SCCP


 Thanks,

 Baris.