[cisco-voip] as5400 IOS enhanced conference bridge configuration

Nick Matthews matthnick at gmail.com
Thu Aug 12 11:30:55 EDT 2010


Transcoding is only supported on the 5400 to do CUBE transcoding.  The
conferencing and other media resources are not supported.  The VGD version
of the 5400 does support this however.

-nick

On Thu, Aug 12, 2010 at 8:59 AM, redsnapper <redsnapper at gmail.com> wrote:

>
>
> Hi,
>
> I have an AS5400XM gateway with two FC cards in slot 1 (6xPVDM2-64), slot 3
> (2xPVDM2-64), and a 8E1 card in slot 7.
> I want to configure a hardware conference bridge on the gateway, but i
> cannot set a maximum sessions value to it, it shows 0 only:
>
> GW10(config-dspfarm-profile)#maximum sessions ?
>        <0-0>  Number of sessions assigned to this profile
>
>
> If i configure a transcoder, it lets me configure more than 300 hardware
> sessions, but whenever i try conference, it gives me none.
> The configuration is as belows. What do you thing is missing?
>
> voice-card 1
> dsp services dspfarm
> voice-card 3
> dsp services dspfarm
>
> sccp local Loopback0
> sccp ccm 10.10.10.102 identifier 102 version 7.0
> sccp ccm 10.10.10.101 identifier 101 version 7.0
> !
> sccp ccm group 100
> bind interface Loopback0
> associate ccm 101 priority 1
> associate ccm 102 priority 2
> associate profile 111 register GBIPT_CFB
> !
> dspfarm profile 111 conference
> codec g711ulaw
> codec g711alaw
> codec g729ar8
> codec g729abr8
> codec g729r8
> codec g729br8
> associate application SCCP
>
>
> Thanks,
>
> Baris.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100812/40c8c9cd/attachment.html>


More information about the cisco-voip mailing list