[cisco-voip] 29xx routers and CCM 6.1?

[Dennis Heim]

You are going to need to apply a patch/device-pack to support these. I doubt 29xx will accept being configured as a 28xx. Make sure if you are on main line you are on atleast M3.

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com
cdw.com/content/solutions/unified-communications/



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Countryman, Edward
Sent: Thursday, August 12, 2010 2:27 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 29xx routers and CCM 6.1?

Our networking has started to deploy 29xx routers in our environment, I noticed there are no options in my 6.1 call manager to configure these.
Does anyone know if they are supported on 6.1 or can I just select the
equivalent 28xx version????   

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip