[cisco-voip] What controls bearer-cap?

[Robert Kulagowski]

On Thu, Aug 19, 2010 at 8:45 AM, Wes Sisk <wsisk at cisco.com> wrote:
> Robert,
>
> From a colleague:
>
> <quote>
> GW should just pass the bearer-cap from the incoming leg to the outgoing leg
> for pri-pri scenario. I have a similar setup in my lab using BRI - PRI.
>
> Couple of things to try :
>
> 1) If we remove the translation-profile from the voice-ports, do we see the
> "unrestricted digital" bearer-cap in the outgoing isdn setup?
>
> 2) we enable the following debugs and collect the output for a failure call
> in order to see where bearer-cap is lost :

I'll give that a try.  I've already got SR 615201191 open and the TAC
guy is also similarly puzzled / intrigued.