[cisco-voip] Call transfer from Unity Connections to extension on CME

[Mike Olivere]

Lelio,

I can dial between CUCM and CME with no issues, but some reason I can't transfer out of Unity CXN to CME. The CME gateway partition is in the voicemail CSS.

Thanks,
Mike

-----Original Message-----
From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Friday, August 20, 2010 9:12 PM
To: Mike Olivere
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Call transfer from Unity Connections to extension on CME

 From what I recall, MWIs are sent over the integration ports for a  
particular telephone system, calls themselves are sent out any  
available ports (I believe on order of creation?)

There are trunk configuration options but I was told those don't help.

That being said, you'll need both route patterns on CCM and dial peers  
on CME to send calls to either system.

If you can send off a quick (ASCII) diagram, we can offer more.

I'll also try to drudge up the TAC case which I opened to understand  
trunks.


…
Don't look at me, my iPod maid that spilling mistake.

On 2010-08-20, at 8:57 PM, "Mike Olivere" <mikeeo at msn.com> wrote:

> Hey all, I have an issue where DIDs come in on a PRI to CUCM, but  
> reside on a CME via an H323 gateway. When the Unity connections AA  
> answers and the user dials an extension on a CME phone I get  
> “don’t recognize that number”.
>
>
>
> How do I tell Unity that extensions that start with 33XX should be  
> sent back to call manager? Routing rule? CoS?
>
>
>
> Thanks,
>
> Mike
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip