[cisco-voip] Call transfer from Unity Connections to extension on CME

[Lelio Fulgenzi]

The partition holding the route patterns which send calls over that  
gateway is what is needed.

Have you tried the DNA?

…
Don't look at me, my iPod maid that spilling mistake.

On 2010-08-20, at 10:26 PM, "Mike Olivere" <mikeeo at msn.com> wrote:

> Lelio,
>
> I can dial between CUCM and CME with no issues, but some reason I  
> can't transfer out of Unity CXN to CME. The CME gateway partition is  
> in the voicemail CSS.
>
> Thanks,
> Mike
>
> -----Original Message-----
> From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
> Sent: Friday, August 20, 2010 9:12 PM
> To: Mike Olivere
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Call transfer from Unity Connections to  
> extension on CME
>
> From what I recall, MWIs are sent over the integration ports for a
> particular telephone system, calls themselves are sent out any
> available ports (I believe on order of creation?)
>
> There are trunk configuration options but I was told those don't help.
>
> That being said, you'll need both route patterns on CCM and dial peers
> on CME to send calls to either system.
>
> If you can send off a quick (ASCII) diagram, we can offer more.
>
> I'll also try to drudge up the TAC case which I opened to understand
> trunks.
>
>
> …
> Don't look at me, my iPod maid that spilling mistake.
>
> On 2010-08-20, at 8:57 PM, "Mike Olivere" <mikeeo at msn.com> wrote:
>
>> Hey all, I have an issue where DIDs come in on a PRI to CUCM, but
>> reside on a CME via an H323 gateway. When the Unity connections AA
>> answers and the user dials an extension on a CME phone I get
>> “don’t recognize that number”.
>>
>>
>>
>> How do I tell Unity that extensions that start with 33XX should be
>> sent back to call manager? Routing rule? CoS?
>>
>>
>>
>> Thanks,
>>
>> Mike
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>