[cisco-voip] Call transfer from Unity Connections to extension on CME

[Lelio Fulgenzi]

You should be able to test this by assigning a phone/DN on your  
callmanager the same device/line css assigned to the voice mail port  
and trying again.
…
Don't look at me, my iPod maid that spilling mistake.

On 2010-08-20, at 10:36 PM, "Mike Olivere" <mikeeo at msn.com> wrote:

>
> I can dial from any CUCM phone to a CME phone and vice versa. The  
> partition that the CME gateway resides is in the voicemail CSS.
>
> -----Original Message-----
> From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
> Sent: Friday, August 20, 2010 10:29 PM
> To: Mike Olivere
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Call transfer from Unity Connections to  
> extension on CME
>
> The partition holding the route patterns which send calls over that
> gateway is what is needed.
>
> Have you tried the DNA?
>
> …
> Don't look at me, my iPod maid that spilling mistake.
>
> On 2010-08-20, at 10:26 PM, "Mike Olivere" <mikeeo at msn.com> wrote:
>
>> Lelio,
>>
>> I can dial between CUCM and CME with no issues, but some reason I
>> can't transfer out of Unity CXN to CME. The CME gateway partition is
>> in the voicemail CSS.
>>
>> Thanks,
>> Mike
>>
>> -----Original Message-----
>> From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
>> Sent: Friday, August 20, 2010 9:12 PM
>> To: Mike Olivere
>> Cc: cisco-voip at puck.nether.net
>> Subject: Re: [cisco-voip] Call transfer from Unity Connections to
>> extension on CME
>>
>> From what I recall, MWIs are sent over the integration ports for a
>> particular telephone system, calls themselves are sent out any
>> available ports (I believe on order of creation?)
>>
>> There are trunk configuration options but I was told those don't  
>> help.
>>
>> That being said, you'll need both route patterns on CCM and dial  
>> peers
>> on CME to send calls to either system.
>>
>> If you can send off a quick (ASCII) diagram, we can offer more.
>>
>> I'll also try to drudge up the TAC case which I opened to understand
>> trunks.
>>
>>
>> …
>> Don't look at me, my iPod maid that spilling mistake.
>>
>> On 2010-08-20, at 8:57 PM, "Mike Olivere" <mikeeo at msn.com> wrote:
>>
>>> Hey all, I have an issue where DIDs come in on a PRI to CUCM, but
>>> reside on a CME via an H323 gateway. When the Unity connections AA
>>> answers and the user dials an extension on a CME phone I get
>>> “don’t recognize that number”.
>>>
>>>
>>>
>>> How do I tell Unity that extensions that start with 33XX should be
>>> sent back to call manager? Routing rule? CoS?
>>>
>>>
>>>
>>> Thanks,
>>>
>>> Mike
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>