[cisco-voip] DSP Question

[Zoltan.Kelemen at emerson.com]

They are allocated once you set up the pri-group.

 

They are not allocated based on hardware (as is the case of FXO/FXS
ports for example)

 

Regards,

 

Zoltan Kelemen
ETS & Information Security 
Global Operations (EMEA)
w: +40 364 731356 | m: +40 757 039093

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew
Loraditch
Sent: Tuesday, August 24, 2010 4:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] DSP Question

 

Are the DSPs for PRIs automatically assigned so that as long as I have a
T1 setup as a PRI the dsps are already allocated?

I just want to make sure as I preconfigure some new routers that I am
not assigning sessions to Transcoding or conferencing that would take up
DSPs my PRI needs.

Thanks!

 

 

Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive

Timonium, MD 21093 
support at heliontechnologies.com <mailto:support at heliontechnologies.com> 
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com
<http://www.heliontechnologies.com/>  
Support Issue? Email support at heliontechnologies.com
<mailto:support at heliontechnologies.com>  for fast assistance!

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100824/2a7281be/attachment.html>