[cisco-voip] DSP Question

[Matthew Loraditch]

I setup the pri-groups so I should be good.
Thanks!


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: Zoltan.Kelemen at Emerson.com [mailto:Zoltan.Kelemen at Emerson.com]
Sent: Tuesday, August 24, 2010 10:22 AM
To: Matthew Loraditch; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] DSP Question

They are allocated once you set up the pri-group.

They are not allocated based on hardware (as is the case of FXO/FXS ports for example)

Regards,

Zoltan Kelemen
ETS & Information Security
Global Operations (EMEA)
w: +40 364 731356 | m: +40 757 039093
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Tuesday, August 24, 2010 4:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] DSP Question

Are the DSPs for PRIs automatically assigned so that as long as I have a T1 setup as a PRI the dsps are already allocated?
I just want to make sure as I preconfigure some new routers that I am not assigning sessions to Transcoding or conferencing that would take up DSPs my PRI needs.
Thanks!


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100824/21aa6ec1/attachment.html>