[cisco-voip] Installing Cisco Unity Express on SRE-700...

[Lelio Fulgenzi]

Inglorious.

…
Don't look at me, my iPod maid that spilling mistake.

On 2010-08-24, at 8:56 PM, Jonathan Charles <jonvoip at gmail.com> wrote:

> Bastards.
>
> On Tue, Aug 24, 2010 at 6:01 PM, Steve Sarrick <ssarrick at drsllc.net>  
> wrote:
> I ran into the same issue and TAC sent me a new module.  The new one  
> came up with no issues.
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
> bounces at puck.nether.net] On Behalf Of Jonathan Charles
> Sent: Tuesday, August 24, 2010 6:08 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Installing Cisco Unity Express on SRE-700...
>
>
>
> So, anyone done this yet?
>
>
>
> So, from the device, I try to install CUE 8.0.2:
>
>
>
> service-module sm 1/0 install url ftp://cisco:cisco123@10.50.2.108/cue-vm-k9.sme.8.0.2.pkg
>
> Proceed with installation? [no]: y
>
>
>
> *Aug 24 22:04:38.547: %SM_INSTALL-6-INST_RSRC_GET: Getting resource  
> information from SM1/0.
>
>
>
> Then, after a minute or two:
>
>
>
> *Aug 24 22:03:41.639: %SM_INSTALL-3-INST_NORESP: SM1/0 SW  
> installation failed module not responding
>
>
>
> On the service module (telnet to device, session to SRE-700), all I  
> see is:
>
>
>
>
>
> Initializing memory. Please wait...
>
>
>
> Initializing memory. Please wait...
>
>
>
>
>
> It makes no attempt to FTP the file....
>
>
>
> During the attempt the status says:
>
>
>
> ROUTER# service-module sm 1/0 status
>
> Service Module is Cisco SM1/0
>
> Service Module supports session via TTY line 67
>
> Service Module is trying to recover from error
>
> Service Module heartbeat-reset is enabled
>
> Service Module is in fail open
>
> Service Module status is not available
>
> Install of ftp://*****:*****@10.50.2.108/cue-vm-k9.sme.8.0.2.pkg in  
> progress
>
> Install status : Install started
>
>
>
> After it fails, I get:
>
>
>
> ROUTER#service-module sm 1/0 status
>
> Service Module is Cisco SM1/0
>
> Service Module supports session via TTY line 67
>
> Service Module is trying to recover from error
>
> Service Module heartbeat-reset is enabled
>
> Service Module is in fail open
>
> Service Module status is not available
>
> No install/uninstall in progress
>
>
>
>
>
> This module is brand new... in a Cisco 2911 running 15.1(2T)
>
>
>
>
>
> Any ideas?
>
>
>
>
>
>
>
>
>
> Jonathan
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100824/74c0f891/attachment.html>