[cisco-voip] Unity Connection 8 IMAP authentication fails usingLDAPs

[Beck, Christopher]

Are you using FQDN or ip addresses for the AD Domain Controllers in the LDAP configuration?

We had TAC tell us to use the FQDN, restart IMAP server and DIRSYNC service, then it worked.

CHris




On Aug 27, 2010, at 1:24 PM, Ayoub, Gregory E wrote:

> We have our Unity Connection server set to authenticate with our AD server 
> using secure LDAP over port 636.  When, I attempt to retrieve messages via 
> IMAP, it fails and says I have a bad username or password.  If I turn of 
> secure LDAP, and just use port 389, IMAP works fine.
> 
> Our Callmanager is using the exact same config for LDAPs authentication and 
> it works fine -- so I am confident the certs are okay.
> 
> If anyone has come across this problem in Unity Connection 8, please let me 
> know.
> 
> -greg 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


Confidentiality Notice: This email is intended for the sole use of the intended recipient(s) and may contain confidential, proprietary or privileged information. If you are not the intended recipient, you are notified that any use, review, dissemination, copying or action taken based on this message or its attachments, if any, is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy or delete all copies of the original message and any attachments. Thank you.