[cisco-voip] Anyone install on a IBM x3650-m2

[Christopher Trown]

On 12/1/2010 2:07 PM, Christopher Trown wrote:
> 
> 
>       Has anyone installed either CUPS 7.0 or UCCX 8.0 on an IBM
> x3650-M2?  I don't have the exact versions handy, but using this server
> is allowed.  The part number I ordered from IBM is 7947-AC1.
> 
>      The problem I encounter is that the installation errors out with:
> 
> Validation Error on HSSI mode:
> 7835I3 Validation Failure:
> Disk validation Error: Not enough disks found [0]
> expecting [2]
> 
>      The other errors are checks for 7845I3 systems.
> 
>      I have a case open with TAC, but was wondering if anyone here had
> run into this.
> 
>      There are definitely drives in the system.  The RAID BIOS setup
> sees them and has even configured a virtual disk.
> 
>      Am I not loading the correct driver?
> 
>      I can't find anything at Cisco's site.
> 
>      Thanks for any clues.
> 


     So it looks that despite ordering what I had read to order, the
systems were shipped with the incorrect RAID controller.

     Sigh...

Chris...

-- 
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ctrown.vcf
Type: text/x-vcard
Size: 236 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101202/e1594732/attachment.vcf>