[cisco-voip] Anyone install on a IBM x3650-m2

[Ryan Ratliff]

Looking at http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview0900aecd80091615.html...

The 7947-AC1 part is just the chassis component included in all of the 3650-M2 bundles. You should have ordered the 7947-PMx which includes all of the necessary components, based on the MCS equivalent you were going for.  Table 1 lists these part numbers.

-Ryan

On Dec 1, 2010, at 5:07 PM, Christopher Trown wrote:



     Has anyone installed either CUPS 7.0 or UCCX 8.0 on an IBM
x3650-M2?  I don't have the exact versions handy, but using this server
is allowed.  The part number I ordered from IBM is 7947-AC1.

    The problem I encounter is that the installation errors out with:

Validation Error on HSSI mode:
7835I3 Validation Failure:
Disk validation Error: Not enough disks found [0]
expecting [2]

    The other errors are checks for 7845I3 systems.

    I have a case open with TAC, but was wondering if anyone here had
run into this.

    There are definitely drives in the system.  The RAID BIOS setup
sees them and has even configured a virtual disk.

    Am I not loading the correct driver?

    I can't find anything at Cisco's site.

    Thanks for any clues.

Chris...

-- 
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
<ctrown.vcf>_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101202/b52577d5/attachment.html>