[cisco-voip] dsp firmware

[Robert Shearrill]

Can anyone tell me should the dsp firmware for the flex group voice and the flex group conference be different

Here are two examples; how does the conference firmware get determined?


DSP groups on slot 0:
dsp 1:
  State: UP, firmware: 9.4.801
  Max signal/voice channel: 16/16
  Max credits: 240
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 16
    Voice channels allocated: 0
    Credits used: 0


 dsp 4:
  State: UP, firmware: 1.1.1
  Max signal/voice channel: 16/16
  Max credits: 240
  Group: FLEX_GROUP_CONF, complexity: CONFERENCE
    Shared credits: 0, reserved credits: 240
    Conference session: 2
    Credits used: 0
DSP groups on slot 0:



___________________________________________________________________________

dsp 1:
  State: UP, firmware: 4.4.3
  Max signal/voice channel: 16/16
  Max credits: 240
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 16
    Voice channels allocated: 0
    Credits used: 0


 dsp 4:
  State: UP, firmware: 1.1.1
  Max signal/voice channel: 16/16
  Max credits: 240
  Group: FLEX_GROUP_CONF, complexity: CONFERENCE
    Shared credits: 0, reserved credits: 240
    Conference session: 2
    Credits used: 0

Thanks

Robert

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101205/3cb2f653/attachment.html>