[cisco-voip] dsp firmware

[Ryan Ratliff]

It's bundled with IOS unless you got a special DSPWARE that is saved in flash.

-Ryan

On Dec 5, 2010, at 10:17 PM, Robert Shearrill wrote:

Can anyone tell me should the dsp firmware for the flex group voice and the flex group conference be different
 
Here are two examples; how does the conference firmware get determined?
 
 
DSP groups on slot 0:
dsp 1:
  State: UP, firmware: 9.4.801
  Max signal/voice channel: 16/16
  Max credits: 240
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 16
    Voice channels allocated: 0
    Credits used: 0
 
 
 dsp 4:
  State: UP, firmware: 1.1.1
  Max signal/voice channel: 16/16
  Max credits: 240
  Group: FLEX_GROUP_CONF, complexity: CONFERENCE
    Shared credits: 0, reserved credits: 240
    Conference session: 2
    Credits used: 0
DSP groups on slot 0:
 
___________________________________________________________________________

dsp 1:
  State: UP, firmware: 4.4.3
  Max signal/voice channel: 16/16
  Max credits: 240
  Group: FLEX_GROUP_VOICE, complexity: FLEX
    Shared credits: 240, reserved credits: 0
    Signaling channels allocated: 16
    Voice channels allocated: 0
    Credits used: 0
 
 
 dsp 4:
  State: UP, firmware: 1.1.1
  Max signal/voice channel: 16/16
  Max credits: 240
  Group: FLEX_GROUP_CONF, complexity: CONFERENCE
    Shared credits: 0, reserved credits: 240
    Conference session: 2
    Credits used: 0
 
Thanks
 
Robert
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101206/c56236e0/attachment.html>