[cisco-voip] CDR - blank originalCalledPartyNumber?

[Madziarczyk, Jonathan]

I was hoping to see like a few thousand calls from one
callingPartyNumber, but it looks like it's coming from everywhere.

 

I get the timeout thing, but it seems a bit high.  Over the past few
months CDR logged ~1.3M calls, ~780,000 of them were blank
callingPartyNumber.  Seems a bit high J

 

 

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, December 07, 2010 11:07 AM
To: Madziarczyk, Jonathan
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CDR - blank originalCalledPartyNumber?

 

do you use a blank translation pattern for PLAR routing? that would
cause initial blank pattern.

any endpoint going offhook, not entering digits, and encountering digit
timeout would also cause a blank called party number.

Is there any consistency in the list of orig_devicename?

/Wes

Madziarczyk, Jonathan wrote: 

I'm looking over our CDR for the last few months and came upon something
confusing.

 

Normally I use the two fields

callingPartyNumber

originalCalledPartyNumber

to check what calls were made and to whom.  However I have a huge number
of calls where originalCalledPartyNumber is blank.  Occasionally,
finalCalledPartyNumber will have some digits in it (as if the caller is
attempting a call but gets interrupted).

 

Is this normal?  What could be causing this?

 

Thanks!

 
________________________________

 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101207/c4f97f79/attachment.html>