[cisco-voip] 4.2 to 8 upgrade and what licensing have to say

[Dana Tong]

Hi Leslie,

If I recall, I think DMA gives you an xml file which has all of the existing license information. I think you used to install this on a ver 6 or 7 install to import the DLU's.

Perhaps the licensing team will just take this xml file and generate a .lic file for you with the DLU's that you are entitled to.

Cheers
Dana


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Leslie Meade
Sent: Tuesday, 14 December 2010 3:12 PM
To: voyp list
Subject: [cisco-voip] 4.2 to 8 upgrade and what licensing have to say


I am am speaking to licensing about the requirements and I am told the following

-If you are upgrading from version 4 to version 8, there is no need to pass through version 7. You can have it upgraded directly to 8; just have an upgrade license and the DMA file.
-I will need you to send me the DMA file of your Call Manager version 4 to get them converted to version 8.

Hmmm everyone i have asked and on here say no you need to go to 7 and then on to 8...
And since when does cisco do the DMA conversion ?

Am I missing something here ?


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101214/b51ed3bb/attachment.html>