[cisco-voip] Multicast MoH from router flash "Two Sub servers"

[Ryan Ratliff]

Setting two MOH servers to use the same multicast address and port is a very bad idea.  Rather you need to dictate (via MRGL) that devices you want to use the router's MMOH only have access to one MMOH server on CUCM.  You can use the other one as unicast for backup purposes (if you wish).

-Ryan

On Dec 19, 2010, at 8:43 AM, Ahmed Elnagar wrote:

Hi all;
 
I am running it MMoH without a problem with one server…but the problem is that I have 2 Sub servers that should serve MoH…I can’t figure out how to point two servers to use the same multicast IP and port number…or there is a way on the IOS to configure two multicast sources with different IPs or Port numbers?
 
 
Best Regards,
Ahmed Elnagar | CCIE#24697 Voice
 
Networking Team Leader
Raya IT - Professional Networking Services
Mobile    : +20190016211
Tel          : +20238276000 Ext. 2475
Fax         : +20238372930
Email      : ahmed_elnagar at rayacorp.com
Address : El Motamayez District - 6th of October
<image001.jpg>
 
 
Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101220/d25c6d86/attachment.html>