[cisco-voip] Testing complex dial plans

[Stephen Welsh]

Hi Tony,

You could try using PhoneView from Unified FX (http://www.unifiedfx.com), there is an updated version due to be released in a few days that includes a command macro feature (among other things), this would allow you to 'record' the actions to perform a dial instruction(s), and then perform the dial command sequence on one or more phones.

It's not designed to automatically verify if the call completed, but you could use it to speed-up performing the test, as well as performing the test on multiple phones at once if this was useful.

There is a demo video here: http://www.unifiedfx.com/Videos

This may not be exactly what you had in mind, but you may be able to make it work for you.

Thanks

Stephen

On 29 Dec 2010, at 19:57, Tony Lupis wrote:

Hello everyone,

Does anyone know of any tools to do automated testing of complex dial plans? Every time we make a change to our dial plan, testing to make sure everything is dial-able often takes longer than the change itself.

Are there any war dialers (used for lawful purposes) or other tools out there?

Thanks, Tony

Tony Lupis
Voice Engineer

<ATT00001..txt>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101229/ca3daf13/attachment.html>