[cisco-voip] Route List reset needed

[Cheng, Karen]

Sorry you can also add the call preserve under the global config instead of the voice class:

voice service voip
 h323
  call preserve

Karen Cheng
Voice Engineer



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Cheng, Karen
Sent: Friday, 31 December 2010 11:16 AM
To: 'Bill Riley'; 'Adam Frankel (afrankel)'
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Route List reset needed

Yes it does drop active ISDN calls.

Unless you have call preservation turned on.

On your H323 gateway you need the

Call preserve command like so:

voice class h323 1
  h225 timeout tcp establish 3
  call preserve

And on call manager you need to enable the "Allow peer to preserve H323 calls" parameter. You click Advanced first before being able to see it.

Regards

Karen Cheng
Voice Engineer



From: Bill Riley [mailto:bill at hitechconnection.net]
Sent: Friday, 31 December 2010 11:09 AM
To: Cheng, Karen; 'Adam Frankel (afrankel)'
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Route List reset needed

I know it does not physically restart it, I am just worried about active calls.

From: Cheng, Karen [mailto:Karen.Cheng at racq.com.au]
Sent: Thursday, December 30, 2010 7:07 PM
To: 'Bill Riley'; 'Adam Frankel (afrankel)'
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Route List reset needed

Restarting or resetting an H.323 gateway does not physically restart/reset the gateway; it only reinitializes the configuration that was loaded by Cisco Unified Communications Manager. When you reset any other gateway type, Cisco Unified Communications Manager automatically drops the calls that are using the gateway. When you restart any other gateway type, Cisco Unified Communications Manager attempts to preserve the calls that are using the gateway.

Karen Cheng
Voice Engineer


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill Riley
Sent: Friday, 31 December 2010 11:03 AM
To: 'Adam Frankel (afrankel)'
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Route List reset needed

So if I reset the route list does it reset the h.323 gateways in the route groups and drop the active calls?

Does this behavior change in any newer version?



From: Adam Frankel (afrankel) [mailto:afrankel at cisco.com]
Sent: Thursday, December 30, 2010 5:19 PM
To: Bill Riley
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Route List reset needed

It will not work without the reset of the route list, unfortunately.

Regards,
Adam

------------Original Message--------------
From: Bill Riley <bill at hitechconnection.net><mailto:bill at hitechconnection.net>
Sent: Thu, Dec 30, 2010 3:49:47 Pm
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
CC:
Subject: [cisco-voip] Route List reset needed
Running CUCM 6.14. I need to change the order of a route list so calls go through a different gateway first. I know it says I have to reset the route list but do I really need to? Will it work without the reset? I don't want to drop the active calls on the gateway.





_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip

Buy your loved one the gift of peace of mind with an RACQ gift membership. Join the Club today at www.racq.com/membership, 13 1905, 24 hours every day or in store

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.

Buy your loved one the gift of peace of mind with an RACQ gift membership. Join the Club today at www.racq.com/membership, 13 1905, 24 hours every day or in store

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.

Buy your loved one the gift of peace of mind with an RACQ gift membership. Join the Club today at www.racq.com/membership, 13 1905, 24 hours every day or in store

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101231/ad590223/attachment.html>