[cisco-voip] Command for determining which dial-peer will be used on router?

[Wes Sisk]

http://www.ciscosystems.com/en/US/docs/ios/12_3/vvf_r/vrg_sh2_ps1839_TSD_Products_Command_Reference_Chapter.html#wp999333

/Wes

On Tuesday, February 02, 2010 11:41:01 AM, Robert Kulagowski 
<rkulagow at gmail.com> wrote:
> I thought I saw in this list that there's a way to have the router 
> show you which dial-peer is going to be used based on a particular 
> number pattern. Sort of what you see when doing a "deb voip ccapi 
> inout" when it shows you the list of possible "outgoing dial peer=" 
> values.
>
> I'm not trying to test the voice translation-pattern stuff, but the 
> actual DP candidates.
>
> Thanks.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip