[cisco-voip] Command for determining which dial-peer will be used on router?

[Ryan Ratliff]

Try 'show dialplan number'.

-Ryan

On Feb 2, 2010, at 11:41 AM, Robert Kulagowski wrote:

I thought I saw in this list that there's a way to have the router show you which dial-peer is going to be used based on a particular number pattern. Sort of what you see when doing a "deb voip ccapi inout" when it shows you the list of possible "outgoing dial peer=" values.

I'm not trying to test the voice translation-pattern stuff, but the actual DP candidates.

Thanks.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip