[cisco-voip] Command for determining which dial-peer will be used on router?

[Lelio Fulgenzi]

i like using the csim tool as well. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Robert Kulagowski" <rkulagow at gmail.com> 
To: "Ryan Ratliff" <rratliff at cisco.com> 
Cc: cisco-voip at puck.nether.net 
Sent: Tuesday, February 2, 2010 12:10:11 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Command for determining which dial-peer will be used on router? 

Ryan Ratliff wrote: 
> Try 'show dialplan number'. 

That works, but it's not matching the "8T" dialpeers that I've got, only 
those that have matchable digits, like 81312....... 

But, the link that Wes sent has some additional information, and it appears 
that "timeout" is the additional parameter I need. 

Thanks! 

BTW: It sure would be nice if things were grouped together better; you've 
got "show dialplan" on one hand and "test voice translation-pattern" on the 
other. Other than one group of people not talking to another group, is 
there a good reason why they're not both under either "show" or "test"? 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100202/1326097e/attachment.html>