[cisco-voip] Command for determining which dial-peer will be used on router?

[Peter Slow]

csim IS awesome, but anyone using it in production should be aware
that it can occasionally crash your router and is totally unsupported.
be careful with it.

-Pete

On Tue, Feb 2, 2010 at 12:37 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> i like using the csim tool as well.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ----- Original Message -----
> From: "Robert Kulagowski" <rkulagow at gmail.com>
> To: "Ryan Ratliff" <rratliff at cisco.com>
> Cc: cisco-voip at puck.nether.net
> Sent: Tuesday, February 2, 2010 12:10:11 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] Command for determining which dial-peer will be
> used on router?
>
> Ryan Ratliff wrote:
>> Try 'show dialplan number'.
>
> That works, but it's not matching the "8T" dialpeers that I've got, only
> those that have matchable digits, like 81312.......
>
> But, the link that Wes sent has some additional information, and it appears
> that "timeout" is the additional parameter I need.
>
> Thanks!
>
> BTW:  It sure would be nice if things were grouped together better; you've
> got "show dialplan" on one hand and "test voice translation-pattern" on the
> other.  Other than one group of people not talking to another group, is
> there a good reason why they're not both under either "show" or "test"?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>