[cisco-voip] Command for determining which dial-peer will be used on router?

[Lelio Fulgenzi]

ah! like the old "show ip mroute" command on the 7206VXR 12T train! 



lelio : hmmm, how do i find out my multicast routes? 
isp : do a "show ip mroute" 
lelio : ok. 
<pause> 
lelio : um, my router rebooted. 
isp : really? show commands shouldn't do that. it must have been something else. try again. 
lelio : ok. 
<pause> 
lelio : um, my router rebooted again. 
isp : oh. ok, don't type that command in again. call Cisco TAC. 




----- Original Message ----- 
From: "Peter Slow" <peter.slow at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "Robert Kulagowski" <rkulagow at gmail.com>, cisco-voip at puck.nether.net 
Sent: Tuesday, February 2, 2010 1:17:38 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Command for determining which dial-peer will be used on router? 

csim IS awesome, but anyone using it in production should be aware 
that it can occasionally crash your router and is totally unsupported. 
be careful with it. 

-Pete 

On Tue, Feb 2, 2010 at 12:37 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote: 
> i like using the csim tool as well. 
> 
> --- 
> Lelio Fulgenzi, B.A. 
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
> Cooking with unix is easy. You just sed it and forget it. 
> - LFJ (with apologies to Mr. Popeil) 
> 
> 
> ----- Original Message ----- 
> From: "Robert Kulagowski" <rkulagow at gmail.com> 
> To: "Ryan Ratliff" <rratliff at cisco.com> 
> Cc: cisco-voip at puck.nether.net 
> Sent: Tuesday, February 2, 2010 12:10:11 PM GMT -05:00 US/Canada Eastern 
> Subject: Re: [cisco-voip] Command for determining which dial-peer will be 
> used on router? 
> 
> Ryan Ratliff wrote: 
>> Try 'show dialplan number'. 
> 
> That works, but it's not matching the "8T" dialpeers that I've got, only 
> those that have matchable digits, like 81312....... 
> 
> But, the link that Wes sent has some additional information, and it appears 
> that "timeout" is the additional parameter I need. 
> 
> Thanks! 
> 
> BTW: It sure would be nice if things were grouped together better; you've 
> got "show dialplan" on one hand and "test voice translation-pattern" on the 
> other. Other than one group of people not talking to another group, is 
> there a good reason why they're not both under either "show" or "test"? 
> _______________________________________________ 
> cisco-voip mailing list 
> cisco-voip at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip 
> 
> _______________________________________________ 
> cisco-voip mailing list 
> cisco-voip at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100202/b17d1fb9/attachment.html>