[cisco-voip] Allocation of Speak Time to Users

[Wes Sisk]

Will em timed logout preemt an active call?

/Wes

On Tuesday, February 02, 2010 1:34:05 PM, cips <cisco at cips.nl> wrote:
>
> You could use ExtensionMobility for this. Create a device profile for 
> the use with international access. Associate this profile to the user. 
> The use needs to logon with personal userID and pincode and then the 
> device profile gets "loaded" on the phone.
>
>  
>
> Set the enterprise param in de CCM to a specific amount of time they 
> can log in.
>
> However if the user is logged in via EM the logout is not forced if 
> there is an active call.
>
>  
>
> Maybe this helps.
>
>  
>
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *mark baker
> *Sent:* dinsdag 2 februari 2010 18:21
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Allocation of Speak Time to Users
>
>  
>
> Hi Folks,
>
> Is anybody aware of a mechanism in CCM to allow users to only dial 
> international numbers based on individual Pin Codes? Then on entry to 
> only have access to the line for a predetermined amount of time set by 
> the CCM admin?
>
> Any advice would be greatly appreciated.
>
> Kind Regards,
>
> Mark Baker
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100202/1b51259e/attachment.html>