[cisco-voip] Allocation of Speak Time to Users

[Wes Sisk]

FAC or CMC would work for PIN codes, however they will not limit call 
duration.

Only way to do both that I am aware of is via a script on CUAE, UCCX.  
It could be implemented similar to the calling card application in TCL 
on H.323 or SIP gateway.

/Wes

On Tuesday, February 02, 2010 12:21:07 PM, mark baker <mb at c2ukltd.com> 
wrote:
> Hi Folks,
>
> Is anybody aware of a mechanism in CCM to allow users to only dial 
> international numbers based on individual Pin Codes? Then on entry to 
> only have access to the line for a predetermined amount of time set by 
> the CCM admin?
>
> Any advice would be greatly appreciated.
>
> Kind Regards,
>
> Mark Baker
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100202/97f3d0c4/attachment.html>