[cisco-voip] Internaltional Calls Failing at the Bell PRI

John Lange john at johnlange.ca
Tue Feb 2 15:28:21 EST 2010


Ok, now that I've figured out that it's not the dial pattern causing the
problem, I've turned on debugging and this is what I'm getting:

Feb  2 20:20:46.305: ISDN Se0/3/0:23 Q931: Applying typeplan for sw-type
0xD is 0x2 0x1, Calling num 2049757113
Feb  2 20:20:46.305: ISDN Se0/3/0:23 Q931: Applying typeplan for sw-type
0xD is 0x1 0x1, Called num 011448712002000
Feb  2 20:20:46.309: ISDN Se0/3/0:23 Q931: TX -> SETUP pd = 8  callref =
0x30FB 
	Bearer Capability i = 0x8090A2 
		Standard = CCITT 
		Transfer Capability = Speech  
		Transfer Mode = Circuit 
		Transfer Rate = 64 kbit/s 
	Channel ID i = 0xA98390 
		Exclusive, Channel 16 
	Calling Party Number i = 0x2180, '2049757113' 
		Plan:ISDN, Type:National 
	Called Party Number i = 0x91, '011448712002000' 
		Plan:ISDN, Type:International
Feb  2 20:20:46.405: ISDN Se0/3/0:23 Q931: RX <- RELEASE_COMP pd = 8
callref = 0xB0FB 
	Cause i = 0x809C - Invalid number format (incomplete number)
-----

I also tried numbering-type international, with the same result:

-----


Feb  2 20:24:43.921: ISDN Se0/3/0:23 Q931: Applying typeplan for sw-type
0xD is 0x2 0x1, Calling num 2049757113
Feb  2 20:24:43.921: ISDN Se0/3/0:23 Q931: Applying typeplan for sw-type
0xD is 0x1 0x1, Called num 011448712002000
Feb  2 20:24:43.921: ISDN Se0/3/0:23 Q931: TX -> SETUP pd = 8  callref =
0x3100 
	Bearer Capability i = 0x8090A2 
		Standard = CCITT 
		Transfer Capability = Speech  
		Transfer Mode = Circuit 
		Transfer Rate = 64 kbit/s 
	Channel ID i = 0xA98390 
		Exclusive, Channel 16 
	Calling Party Number i = 0x2180, '2049757113' 
		Plan:ISDN, Type:National 
	Called Party Number i = 0x91, '011448712002000' 
		Plan:ISDN, Type:International
Feb  2 20:24:44.025: ISDN Se0/3/0:23 Q931: RX <- RELEASE_COMP pd = 8
callref = 0xB100 
	Cause i = 0x809C - Invalid number format (incomplete number)

---

I tested this PRI on an Asterisk box and sending 011448712002000 works
so I'm at a loss as to why the Cisco is having problems.

Any suggestions?


-- 
John Lange
http://www.johnlange.ca



More information about the cisco-voip mailing list