[cisco-voip] CER 7.1> ERL Membership > Switchports > Import

[Jason Aarons (US)]

I want to assign all ports on a switch to a single ERL. It's easy to do
via the GUI as I just search on IP and put check mark in the switch
which selects all ports then hit Assign ERL. However I have about 300
Catalyst switches of various makes/models.

 

The view sample import indicates the following fields in sample Excel
csv, those with * are mandatory, there are 3;

ERL Name*,Switch IP Address*,IfName,Location,Phone Extension,Phone IP
Address,Phone Type,Port Name,Phone MAC Address,Switch HostName,Port
Identifier*

 

Sample row;

New Zone,10.64.134.101,Fa0/11,Cube 16 Floor 6,,, ,FastEthernet0/11,
,cat3524PWR-XL-MKTG:,0/11

 

The problem is the switch models vary so the Port Identifier vary, why
can't I just use the ERL Name and Switch IP Address and say all ports?
Like I'm going to know all the Port Identifiers?

 

Anyone know of a workaround? What I really want is;

ERL Name, Switch IP Address




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100204/5f526d7d/attachment.html>